nokia x android security code removal

      nokia x android security code 

model: nokia x android

problem: security code

history: nakalimutan


ito nung una..,






procedure;

1. off lang ang fone,

2. pinduting ng sabay ang power + volume up

ito ang pic paki sundan lang po




pagkapindot ng power+volume up ito ang lalabas



> piliin lang po ang wipe data/fuctory reset press ang power button para sa ok




> pagkatapos ito naman ang lalabas piliin ang delete all user



> paglatapos ito naman ang lalabas piliin ang reboot symtem now



> pagkatapos sundan lang po ito







done

How To Set Up ADB/USB Drivers for Android Devices

I. Setting Up The SDK

1. Download the Latest Android SDK from Google

Android SDK

2. Extract the Android SDK .Zip file to C:\AndroidSDK (this should name the new folder created AndroidSDK in the C directory.

3. On your phone, click Settings > Applications > Development and make sure USB Debugging is on.

4. Plug your phone into your computer via USB cable (it needs to be on). It should say installing drivers if using Windows.

5. After it installs the drivers, goto the Start menu and type cmd into the search bar (Vista or higher) or click Run then type in cmd (XP) to open the command prompt.

6. Type the following into the command prompt window (hitting enter at the end of every line):

cd\
cd AndroidSDK\tools\
adb devices

You should see a serial number pop up, it’s the serial number of your phone. This means you are all set.

If you do NOT see a serial number, then we need to reinstall the drivers.

II. IF DRIVERS JUST WON’T AUTOMATICALLY INSTALL, DO IT MANUALLY HERE

1. Download your phone’s driver’s below then goto your Device Manager on your computer, look for the phone and click on it. Then click Properties > Update Driver > Browse > Let me pick > Computer > Have Disk > Browse > Then select the driver you downloaded below:

Motorola Droid Drivers (unzip the file once you download it).

Motorola Milestone Drivers (follow the instructions on the page).

Motorola CLIQ Drivers (follow the instructions on the page).

Nexus One Drivers (unzip the file once you download it).

Samsung Behold 2 Drivers (unzip the file, run the setup.exe) (If you have Windows 64Bit, you CANNOT install the Behold Drivers. Find someone with a 32Bit system to to any Behold 2 procedures involving ADB).

Samsung Galaxy Drivers (unzip the file, do NOT run setup.exe. Instead follow step 1 in Section II and install manually.)
Samsung Galaxy Fastboot Drivers (unzip the file, then when you plug the phone in via fastboot mode, select to install drivers manually and choose the folder you just unzipped and it should install them from there).

III. (Optional) Reinstall Drivers (If they did not install properly in Section I or II)

1. Download USBDeview

USBDeview

2. While the phone is still plugged in, open USBDeview and sort by manufacturer. Find all the HTC drivers and delete them all.

3. Once all have been deleted, unplug the phone from the USB cable and plug it back in.

4. The correct drivers should reinstall automatically (check the drivers as they are installing, one should say ADB Device driver).

5. To check, goto Devices (or Device Manager for older versions of Windows) in your Start menu then click on the “Android Phone”. Click on the Hardware tab, and check the list of drivers for ADB Interface under Type.
IV. Some Common ADB/Fastboot Commands

ADB Commands
adb devices – lists which devices are currently attached to your computer
adb install <packagename.apk> – lets you install an Android application on your phone
adb remount – Remounts your system in write mode – this lets you alter system files on your phone using ADB
adb push <localfile> <location on your phone> – lets you upload files to your phones filesystem
adb pull <location on your phone> <localfile> – lets you download files off your phones filesystem
adb logcat – starts dumping debugging information from your handset to the console – useful for debugging your apps
adb shell <command> – drops you into a basic linux command shell on your phone with no parameters, or lets you run commands directly

adb devices – lists which devices are currently attached to your computer

adb install <packagename.apk> – lets you install an Android application on your phone

adb remount – Remounts your system in write mode – this lets you alter system files on your phone using ADB

adb push <localfile> <location on your phone> – lets you upload files to your phones filesystem

adb pull <location on your phone> <localfile> – lets you download files off your phones filesystem

adb logcat – starts dumping debugging information from your handset to the console – useful for debugging your apps

adb shell <command> – drops you into a basic linux command shell on your phone with no parameters, or lets you run commands directly

Fastboot Commands

fastboot devices – lists which devices in fastboot mode are currently attached to your computer

fastboot boot <filename> – boots a rom stored on your pc specified by the filename

fastboot flash <partition> <filename> – flashes a rom stored on your pc, partition can be one of {boot, recovery, system, userdata}

[source]       

Starmobile Engage 9

      Starmobile Engage 9 Hang on Logo Done 

Tools and Firmware:

Starmobile Engage 9 Firmware

LiveSuit V1.11


Procedure:

1. Install driver (hold volume down para mag install ang driver pag installed na hugot ulit si tab)
2. Open Livesuit and load firmware
3. Hold Volume Down tapos connect yung tab sa PC
4. Wait lang hangang matapos..

Done!



Results...










Wifi,Camera etc.. are working fine. 

iPhone 4 7.1.1 iCloud Bypass Solution

Tested in

iPhone 4 GSM

iPhone 4 GSM Rev A

iPhone 4 CDMA

STATUS:

PROCEDURE:

- run iPhone 4 iOS 7.1.1 iCloud Bypass Shell by Xeven2nd

1. click " ssh_rd "

2. put apple device in DFU mode then connect to PC

3. and wait until SUCCESS CONNECT TO LOCALHOST ON PORT 2022

dapat maging ganito status nya after SUCCESS CONNECT TO LOCALHOST ON PORT 2022

4. now click " WinSCP "

5. Fill up

- host name : localhost

- port number : 2022

- user name : root

- password : alpine

-then click LOGIN

6. click " OPEN TERMINAL " then click " OK "

7. type " mount.sh "

8. click " Execute "

9. click " close "

10. browse " mnt1 / Applications "

11. then delete " Setup.app " then click " OK "

12. and Close " WinSCP " and ssh_rd software.

13. then kick your device using tinyumbrella

or any exit recovery software and wait to reboot iphone.

14. finish

Tools: iPhone 4 iOS 7.1.1 iCloud Bypass Shell by Xeven2nd

Asus MemoPad ME172V too many patterns attempt wipe procedure

ASUS MEMOPAD ME172V WIFI hard reset

1. Download the "cleardata.zip"
2. Unzip to MicroSD card
3. insert SD to device
4. press power bottun to boot
5. choose clear user data by volume key and press power key to do the clear data

select clear user data

after clear remove sdcard



Finish Product

Wiping On Fastboot Mode Tutorial

Some  tablet or phone are have option like fastboot mode

most of the people they do direct flashing rom when the unit is not on the debug mode or has no recovery menu to wipe or make a factory reset

First you need to know the fastboot mode of your device
usually volume down + home + power 

put your phone in fastboot mode then insert usb cable then and install all the driver needed

Tools:  Fastboot.zip extract this file on drive C:
Then click on start, open run and type cmd

now type the commands below and phone should be in the adb mode.

cd.. cd.. fastboot-windows -w


 sample unit: Unit: i9300 spreadtrum sIII clone 

Status: hang on logo 

 Done Finish Product:

n7100 4.3 unlock done w/KNOX security

Requirements:

internet connection

z3x box (buy on z3x-team.com if you don't have this gadget)

 

use 5310 usb cable
turn on usb debugging 1st
dial *#7284# choose MTP+ADB only

root your phone using kingo root
download kingoroot: Kingo Root
"your phone will reboot to download mode do not touch your phone yet just let the process finish"

after root go to PLAYSTORE then download Super SU by chainfire then Open Super SU
"open super SU and it will prompt about KNOX SECURITY" Choose DISABLE

phone are now ready for unlocking just tick unlock on z3x

 Finish Product :D